The garage door serves as an important line of defense for your house. It keeps intruders from coming to house or stealing things from your garage. In the US, it is noted that majority of the people are using the automatic garage doors simply because they are very easy to use. You just need to press a button and it will make way for you. The convenience it gives is really something to be thankful for. Gone are the days when you have to manually open the door of your garage even if the rain is falling or it’s very cold outside.
However, there are instances when the door does not cooperate with you. So, to do avoid this from happening, you need some tips to prevent your door from malfunctioning early and that you can still repair it when minor problems happen.
1. Monthly Inspection
A monthly inspection of the garage will not hurt and definitely will not cost you a dollar. It pays off to check it every month just to know if all the parts are working well. Garage door repair arlington tx If the hinges, roller, tracks and springs need lubrication then do so. This will save you from headache caused by a non-functioning door because of lack in lubrication. Lubricating the parts well will result to a fully functioning door. Observe the door too while opening and if you notice any noise, then check more closely.
2. Clean the garage door track
Cleaning the track is quite simple. All you need to do is wipe it with a damp cloth to remove all the accumulated grease. When you want to spray a solvent, the best choice would be WD-40. It is advised by the pros not to spray a lubricant to the tracks as lubricants can just make things worse.
3. Tighten the loose hardware
Hinges, screw and other hardwares affect the function of the garage track thus it’s a good idea to check them too.
4. Clean the weather stripping, brackets and rollers.
The weather stripping of the frame should be cleaned as well. Use vinyl cleaner in cleaning it and lubricate it every six months to ensure pliability of the stripping. Make sure that the bracket are securely attached. Slight separation from the surface should not be taken for granted. Check the rollers too. If it’s broken or worn, replace it immediately.
5. Inspect the Door panels and the springs.
Examine if either sides of the door has cracking and dents. Inspect for fatigue and separation of parts/materials.
Last but not the least, always check for the door function. Take note if it opens suddenly or slowly as well as if it’s functioning smoothly.